Product Description
Transportation & Industrial
MOLYKOTE 106
Anti-Friction Coating
Heat-curing dry film lubricant
Features & benefits
• Low coefficient of friction
• High load-carrying capacity
• Good adhesion
Composition
• Solid lubricants
• Organic binder
• Solvent
Applications
Used as dry lubrication for metal/metal combinations. Provides maintenance-free, permanent lubrication of highly stressed friction
combinations with low speeds or oscillating operation. Used where design construction prevents the use of oil or grease or where the risk of soiling is undesirable. Can be used for the dry lubrication of locks, hinges, joints, magnetic armatures and for the anti-seizure coating of engine and gear components
Description
MOLYKOTE 106 Anti-Friction Coating is a heat-curing coating that offers long-lasting high-load-carrying capacity and low coefficient of friction.
How to use
Surface preparation
First, clean and degrease the surface that will be coated with MOLYKOTE 106 Anti-Friction Coating. Phosphating or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir MOLYKOTE 106 Anti-Friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry-film thickness: 5 to 20 µm.
Curing
60 minutes at 150°C (object temperature).
<Alternative condition>
30 minutes at 180°C (object temperature).
Download Resources
• [Full Technical Datasheet (PDF)]
• [Material Safety Data Sheet]
